Plastic Injection Molding
Polymethyl Methacrylate (PMMA) Injection Molding
Trident Components’ long history of working with polymethyl methacrylate, or PMMA, injection molding makes us an industry leader. With our state-of-the-art facilities, production capabilities, and warehousing services, can accurately and cost-effectively meet the demands of any sized project. Commonly known as acrylic and by the Plexiglas® trademark, PMMA is a glass substitute that offers many exceptional properties.
PMMA properties:
Specific Gravity |
1.16 to 1.20 |
|---|---|
Melt Mass Flow Rate (g/10 min) |
0.30 to 4.6 |
Flexural Modulus (psi) |
162000 to 523000 |
Tensile Strength (psi) |
5320 to 11700 |
Tensile Elongation (%) |
0.0 to 7.3 |
Rockwell Hardness |
44 to 101 |
Notched Izod Impact (ft·lb/in) |
0.169 to 1.13 |
DTUL @ 66 psi (0.45 MPa) (°F) |
174 to 221 |
DTUL @ 264 psi (1.8 MPa) (°F) |
168 to 217 |
CLTE, Flow (in/in/°F) |
0.000030 to 0.000066 |
Specific Gravity (g/cm³) |
1.15 to 1.19 |
Melt Mass Flow Rate (g/10 min) |
0.30 to 4.6 |
Flexural Modulus (MPa) |
1120 to 3610 |
Tensile Strength (MPa) |
36.7 to 80.8 |
Tensile Elongation (%) |
0.0 to 7.3 |
Rockwell Hardness |
44 to 101 |
Notched Izod Impact (J/m) |
9.03 to 60.2 |
DTUL @ 66 psi (0.45 MPa) (°C) |
78.7 to 105 |
DTUL @ 264 psi (1.8 MPa) (°C) |
75.6 to 103 |
CLTE Flow (cm/cm/°C) |
0.000054 to 0.00012 |
Contact one of our sales representatives today
to inquire about a quote from Trident Components
or call us today at 888-312-0745. Typical volumes start at 2500 pieces, average orders are usually 10,000 - 20,000 pieces.
